Saturday by appointment only | Fax: (218) 547-1960 | nisfloor@arvig.net
Blog > Common hardwood flooring mistakes and how to avoid them
Tuesday, October 1, 2024
Hardwood flooring can transform your home, adding timeless elegance and value.
However, if you’re not careful, hardwood flooring can also come with some expensive mistakes. Whether you’re tackling a full installation, considering refinishing, or just trying to maintain your floors, knowing what to avoid can save you time and money.
In this article, we’ll guide you through some of the most common hardwood flooring mistakes and how to avoid them. From where not to install hardwood to tips on fixing damaged floors, we’ve got you covered with answers to your most common questions.
Hardwood floors are an investment, and the last thing you want is to make mistakes that could cost you down the line. Whether it’s picking an unsuitable room for hardwood or overlooking important finishing steps, here’s how to avoid the most frequent hardwood flooring mishaps.
Hardwood flooring looks beautiful, but it’s not suitable for every room. High-moisture areas like bathrooms and basements can cause issues for natural hardwood. The constant exposure to water and humidity can cause the wood to warp or crack.
If you’re looking for ideas for bathroom or basement flooring, check out our advice on basement flooring and bathroom flooring for more durable and waterproof options.
As we mentioned, water can cause problems for natural hardwood flooring. Spills left unattended can seep into the wood, causing stains.
Excessive sunlight can also fade the natural color of the wood over time, so installing UV-blocking window treatments is a good idea.
Another mistake? Using harsh cleaning chemicals or abrasive tools. Stick to wood-friendly products and avoid anything that could scratch the surface.
Refinishing hardwood floors is a great way to bring them back to life, but it’s easy to make costly mistakes.
One common error is sanding unevenly or not enough, which can result in a lumpy finish.
Speaking of sanding, always make sure to use the correct grit level for your floors. If you don’t, you could damage the wood.
Another mistake is applying the finish too quickly, which can trap bubbles on the surface. Refinishing takes patience, so follow the steps carefully for the best results.
Yes, you’ll want to install a vapor barrier if you’re putting hardwood floors over a concrete slab or in a moisture-prone area like a basement. The barrier prevents moisture from seeping up and damaging the wood. This is especially important when installing engineered hardwood, which is more moisture-resistant than solid wood but still benefits from this protective layer.
Hardwood flooring offers timeless elegance but isn’t suited for high-moisture areas.
Even with the best intentions, things can go wrong during or after a hardwood flooring project. Whether your floors are uneven, scratched, or water-damaged, we’ll walk you through solutions to fix the most common issues and restore your floors to their former glory.
Mistakes in hardwood installation can lead to expensive fixes down the line. One of the most common issues is uneven floors due to poor subfloor preparation. If the planks aren’t laid properly or the floor isn’t level, you might end up with squeaky spots or gaps between boards. If the problem is severe, you may need to replace problematic sections for a more polished look.
It depends on the type of damage. For minor scratches, you might be able to use a wood filler or a floor polish to buff them out. If the boards are warped due to moisture, you’ll likely need to replace those sections entirely. In more serious cases, a professional may need to re-sand and refinish the entire floor to restore it properly.
Before you jump to replace your hardwood floors, assess the damage. Floors with deep gouges, water damage, or major warping might not be salvageable. However, if the damage is surface level (minor scratches or slight discoloration), refinishing is often enough to bring them back to life. You can also look at how to maximize your budget for flooring renovations to help decide if repairing or replacing makes the most financial sense for your project.
It depends on the damage and your budget. Minor scratches or wear can often be repaired with some easy fixes. In many cases, you’ll be able to tackle those projects on your own. However, significant damage may require seeking the help of a professional to replace the affected areas.
Yes, uneven hardwood floors can usually be fixed, though it depends on the cause of the problem. If the subfloor is uneven, it may need to be leveled before you can reinstall the hardwood. You can also sand down small, uneven areas or use a self-leveling compound if the discrepancy isn’t too severe. In cases of extreme unevenness, the best solution may be to remove and reinstall the flooring.
Once your hardwood floors are installed, keeping them in top shape requires regular maintenance and a little know-how. From easy touch-ups to prolonging hardwood flooring’s life without sanding, here’s how to keep your floors looking new with simple DIY tips.
Always remember to sweep or vacuum your flooring regularly to remove dust and dirt, which can scratch the surface over time.
To get a deeper clean and remove grime, you can also clean the floors with a damp (not wet) mop using a hardwood-friendly cleaner once a week.
While it might sound tedious, taking care of your flooring is a must, especially if you ever plan to sell. Realtor.com found hardwood floors can increase your home’s value by up to 2.5%.
Use area rugs in high-traffic spots, avoid wearing shoes inside, and clean spills immediately to prevent damage. It’s also smart to attach felt pads to the bottom of furniture legs to avoid scratches when moving items around. You can even go the extra mile to maintain proper humidity levels by using a humidifier in winter and a dehumidifier in the summer to prevent the wood from expanding or contracting.
Yes! There are a few ways to refresh hardwood floors without a full sanding. One option is a process called “screening,” where the top layer of the finish is lightly scuffed up before a new coat of finish is applied. Screening can work wonders for floors with minor surface damage. For deeper scratches or wear, however, sanding is the only way to fully restore the wood.
Most hardwood floors need refinishing every seven to 10 years. This means you’ll only need to refinish them roughly four to six times during the floor’s lifespan. However, high-traffic areas may require it sooner if you notice damaged spots appearing sooner.
Most hardwood floors need refinishing every seven to 10 years.
Hardwood floors are a beautiful addition to any home, but they require careful planning, installation, and maintenance to stay in top condition. By avoiding common mistakes, understanding how to fix issues when they arise, and sticking to a regular maintenance routine, you can ensure your floors look stunning for years to come.
Let one of our experts help you find the perfect floor!
Walker - 6470 Highway 371 NW
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
There was an error submitting your request. Please try again.
Thank you! We'll be in touch shortly.